- Standards: NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
- For fast rotation.
- PVC rotating handle.
- Finish: bright chrome.
- Standards: NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
- Friction bar allows the bar to form a T or L-handle.
- Finish: bright chrome.
- Length: 115mm.
- Weight: 50g.
- Strength to ISO 3315, DIN 3122, NF ISO 3315, ASME B107.10
- Spring steadies hinge in any position, allowing access behind obstacles.
- Non-slip handle.
- Chrome finish.
- Length 150 mm.
- Weight 83 g.
- Standards: NF ISO 3316, ISO 3316, DIN 3123, ASME B107.10
- Finish: chromed.
References:
|
|
D
(mm)
|
D1
(mm)
|
L
(mm)
|
Weight
(g)
|
|
|
|
12 |
8.2 |
55 |
30 |
|
|
|
12 |
8.2 |
100 |
45 |
|
|
|
12 |
8.2 |
150 |
65 |
|
|
|
12 |
8.2 |
250 |
105 |
- Standards: ASME B107.10
- Reaches fasteners out of direct access line.
- Not suitable for torques in excess of 2.8Nm.
- Length: 150mm.
- Weight: 65g.
- Ergonomic bi-material grip.
- For fasteners where access is difficult.
- Blade length: 150mm
- Total length: 275mm
- Weight: 180g
- NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
- Ergonomic bi-material grip.
- Ideal for confined spaces.
- Weight: 76 g.
- ISO 3315, DIN 3122, NF ISO 3315
- Ergonomic, high-strength bi-material handle resistant to common chemicals.
- Chrome finish.
- Length 158mm.
- Standards: NF ISO 3315, ISO 3315, DIN 3122, ASME B107.10
- Ergonomic bi-material grip.
- Ideal for confined spaces.
- Blade length: 160mm.
- Total length: 260mm.
- Universal joint withstands high torques and is spring-steadied in position.
- Long reach and working angle up to 65° allows access to recessed fasteners.
- Length: 385 mm.
- Weight: 215 g.
- Universal joint withstands high torques and is spring-steadied in position.
- Long reach and working angle up to 65° allows access to recessed fasteners.
- Length: 470 mm.
- Weight: 250 g.
- ISO 3316, DIN 3123, NF ISO 3316, ASME B107.10
- Spring-stiffened joints. Stays in position when reaching for fasteners.
- Significant time savings.
- Finish: bright chrome.
- Weight 20g.
- Standards: NF ISO 3316, ISO 3316, DIN 3123, ASME B107.10
- 1/4" female to 3/8" male square drive.
- For adapting 3/8" drive sockets.
- Finish: bright chrome.
- Allows use of square drives smaller than socket drive sizes:
- 1/4" square drive + D.169RJ for 3/8" socket.
- 3/8" square drive + D.169JS for 1/2" socket.
- 1/2" square drive + D.169SK for 3/4" socket.
- Compactness means that fewer tools are needed.
- Magnetic retainer and locking system (JS and SK).
- Knurl allows hand tightening where access is difficult.
- Weight: 96 g.
- Standards: NF ISO 2725-1, NF ISO 1173, ISO 2725-1, ISO 1173, DIN 3124
- Spring clip for frequent bit (1/4" - 6.35 mm) changes.
- Finish: bright chrome.
- Standards: NF ISO 2725-1, NF ISO 1173, ISO 2725-1, ISO 1173, DIN 3124
- Bit lock.
- Square drive has side-hole for ball or plunger lock.
