The tyre changer for use in general service shops and tyre shops with high tyre service volume - with pneumatic tilt-back post, 24" intside clamping, 22" outside clamping  capability and PROSpeed™ technology

• PROSpeed™ – the new exclusive self-adjustable speed system with inverter technology:
  • Automatic speed control by inverter that maximises speed depending on the torque applied
  • First speed as low as 7 rpm for critical tasks
  • Second speed automatically adjusted to between 7 and 18 rpm depending on the torque applied
• Double-acting bead breaker cylinder
• Mounting head adjustable in spaced-apart position relative to the rim
• Self-centring four-jaw turntable
• Plastic protection inside jaws and on mounting head to avoid damage to alloy rims
• Pedal-operated tyre inflator with pressure gauge fitted on tower
• Quick-inflating valve
• Clamping range up to 24"
• With top-side bead seating and inflating kit
• Pedal-operated pneumatic tilt-back post
• Post pneumatically locked in working position
• Bead breaker adjustable in 3 positions
• Capable of mounting / demounting the majority of wheel assemblies in the market
• Optional wheel lift CW1015

• Owing to its special shape the bead breaker blade handles rims most gently and facilitates operation considerably.

PROspeed™ continuously controls the mount/demount conditions in order to provide the optimum torque/speed combination to the motor:

• SAFE: always the most appropriate torque to avoid interruption of the process and damages to tyre and rim
• FAST: automatically selects the maximum speed possible up to 20 rpm
• EASY TO USE: PROspeed™ automatically sets the speed to the torque required

• The self-centring jaws actuated by two clamping cylinders provide a high clamping force, avoiding that the rim slips in the jaws – the wheel is accurately centred and clamped.
• They come with a rounded profile specially developed to accommodate modern rims.

• The rugged cabinet and tower are highly resistant to torsion, meeting the requirements of modern tyre service technology.

• The tyre changers are equipped with a double-acting bead breaking cylinder so that the bead breaker is applied carefully and with no damage to the rim. Both arm length and blade inclination of the bead breaker are adjustable, which grants high performance and flexibility. The rubber pad and the plastic blade protector protect rims from damage.

• The mounting head is provided with plastic inserts to make sure no rim is damaged. It is automatically locked in spaced-apart position to the rim avoiding any risk of damage.

• A direct burst of compressed air facilitates bead seating. The B models offer a top-side bead seater with a 24-litre tank.

• The powerful pneumatic bead assist device is an indispensable accessory for mounting and demounting tyres which are difficult to handle, such as low profile tyres and run flat tyre systems or tyres with hard sidewalls. It is an optimum complement to a tyre changer.
• During the demounting operation the bead pusher presses the upper bead into the drop centre of the rim so that it can be easily levered over the mounting head nose and finally demounted without any effort.
• During the mounting operation of the upper bead the disc retains the bead under the mounting head nose. The bead pusher follows rotation of the wheel, doing the otherwise tedious job of the operator, while preserving both tyre and rim.

• The plus kit is certified by wdk. It consists of plastic bead breaker disc, tyre lever plus, rod with tapered roll, plastic tyre protector, triangular bead pusher, spacers and plastic protector for bead breaker blade, Smart Bead Spacer and a bead clamp.