The wheel balancer for service stations and garages - combines high accuracy with small footprint
Measurement system for high precision and repeatability. Ensures most accurate balance results and is insensitive to ambient conditions.
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
Measuring arm with integrated weight holder for easy application of adhesive wheel weights.
SNAP-ON (John Bean) B100 | |
---|---|
Vehicles supported | Cars / Light trucks / SUVs |
Wheel clamping | Quick nut |
Measuring speed | < 100 rpm |
Balancing accuracy | 1 g |
Angular resolution | ± 0.35° |
Start/Stop balance time - Check spin | 6 s |
Diametre of shaft | 40 mm |
Lenght of shaft | 225 mm |
Dimensions LxWxH | 1100 x 1005 x 1711 mm |
Net weight | 70 kg |
Input power (VAC) | 230 VAC 1ph 50/60 Hz |
MAXIMUM WHEEL DIMENSIONS |
|
Max. wheel diameter | 960 mm |
Wheel width | 76 - 508 mm |
Max. wheel weight | 70 kg |
SEMI-AUTOMATIC DATA ENTRY (SAPE) |
|
Rim diameter | 8 - 25" |
Rim width | 3 - 15" |
MANUAL DATA ENTRY |
|
Rim diameter | 8 - 32" |
Offset | 1 - 20" |
Rim width | 1 - 20" |