The wheel balancer for tyre shops, car dealerships and garages with medium to high tyre service volume: with touchscreen monitor and easyWeight pinpoint indicator light – An accurate, fast and easy solution to position adhesive weights on the wheel.
Touch screen monitor with large digits and coloured weight position indicators – improved intuitiveness and ergonomics.
This new design of the graphical user interface allows fast and intuitive control of balancing operation.
Measurement system for high precision and repeatability. Ensures most accurate balance results and is insensitive to ambient conditions.
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
The patented electro-mechanical Power Clamp™ device clamps the wheel accurately with a constant force, which is most important for every balancing operation.
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
30% reduced cycle time, less than 4.5 seconds, maintaining the same high accuracy.
Touch the screen to automatically rotate the wheel to weight application position.
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Bright LED lighting system that facilitates rim cleaning and aids in the weight positioning process.
SNAP-ON (John Bean) B600P | |
---|---|
Vehicles supported | Cars / Light trucks / SUVs |
Wheel clamping | Power Clamp |
Measuring speed | < 200 rpm |
Balancing accuracy | 1 g |
Angular resolution | ± 0.35° |
Start/Stop balance time - Check spin | 4.5 s |
Diametre of shaft | 40 mm |
Lenght of shaft | 225 mm |
Dimensions LxWxH | 1313 x 868 x 1834 mm |
Net weight | 130 kg |
Input power (VAC) | 230 VAC 1ph 50/60 Hz |
MAXIMUM WHEEL DIMENSIONS |
|
Max. wheel diameter | 1050 mm |
Wheel width | 76 - 508 mm |
Max. wheel weight | 70 kg |
SEMI-AUTOMATIC DATA ENTRY (SAPE) |
|
Rim diameter | 8 - 25" |
Rim width | 3 - 15" |
MANUAL DATA ENTRY |
|
Rim diameter | 8 - 32" |
Offset | 1 - 20" |
Rim width | 1 - 20" |