- For All Ammco Lathes.
- Will increase shop's brake service efficiency.
- Standard with back board and chip catchers.
- Leveling legs.
- Adapters for most passenger cars and light trucks.
- Adapters for most passenger cars and light trucks.
- For 1" arbor
- Weight: 6.97 lb
- 2.125-5.750" (53.98-146.05mm).
- For 1" arbor
- Hubless Rotors & Drums through 1 Ton Vehicles.
- Includes:
- 940924 Backing Plate, (4.7" diameter)
- 940924 Backing Plate, (5" diameter)
- 941202 Backing Plate, (6.2" diameter)
- 940923 Backing Plate, (7.2" diameter)
- 1.25x1.75" (31.75x44.45mm)
- Weight: 0.36 lb
- 1.19x2.25" (30.16x57.15mm)
- Weight: 0.81 lb
- 1.70x2.75" (43.26x69.85mm)
- Weight: 1.48 lb
- 2.33x2.97" (59.13x75.39mm)
- Weight: 1.35 lb
- 2.650" x 3.224" (67.31 x 81.89mm)
- Weight: 1.56 lb
- 2.89x3.50" (73.41x88.90mm)
- Weight: 2.12 lb
- 3.42x4.03" (86.89x102.39mm)
- Weight: 2.12 lb
- Set of 2 hubless adaptors and 1 centering cone
- For 1" arbor
- Contents:
- 2 x Hubless adaptors: 176mm
- Centering cone: 9.5 x 14.5mm
- 1.32x1.67" (33.58x42.42mm)
- Weight: 0.64 lb
- 1.36x1.71" (34.59x43.43mm)
- Weight: 0.7 lb
- 1.71x2.07" (43.46x52.65mm)
- Weight: 1.22 lb
- 2.07x2.44" (52.68x61.98mm)
- Weight: 1.93 lb
- 2.441" x 2.897" (62.00 x 73.58mm)
- Weight: 2.8 lb
- 2.828" x 3.185" (71.83 x 80.90mm)
- 3.203" x 3.560" (81.36 x 90.42mm)
- Capacity 100 lb
- Use With #3102 Arbor Nut
- For Models 2002, 3000, 4000, 4100, 7000, 7500, 7700
- Use With #3101 and 4101 Arbor
- Standard With Models 2002, 3000, 3850, 3860, 4000, 4100, 7000, 7500, 7700
- 1" x 11/16" Step-Down
- For Using 1" Adapters on 11/16" Arbors
- 1 7/8" & 2 1/2"
- Weight 1.4 lb
- Truck Rotors and Drums Up To 200 lb
- For Models 2002,3000,4000,4100,7000,7500,7700
- Weight 29.48 lb
- Complete New Assembly with Precision Micrometers and Cylindrical Holders.
- An extremely high quality part.
- Precise, new, inch or millimeters micrometers allow easy setting of the depth of cut on inner an outer rotor surfaces.
- Making you lathe cut like new will virtually eliminate rotor pulsations and comebacks.
- DOES NOT INCLUDE 906999
- Positive Rake Drum 5/8"x3/4"(16 x 19mm)
- For Models 2002, 3000, 4000, 4100, 7700
- Weight: 0.59 lb
- Negative Rake, 1/2" x 3/8" (12.7 x 9.5mm)
- For Models 2002, 3000, 4000, 4100, 7700
- Tool Bit Set includes Negative Rake - One #10701 (RH) & One #10702 (LH)
- Negative rake, for Ammco lathes
- Pack of 10 pieces
- RH & LH, Positive Rake, for Round - Tool-bit No. 40610
- Round, Carbide Insert, Positive Rake, 10 Pack
- For Models 3000, 4000
- Use With #23682 Spindle Ring
- Standard With Models 4000,4100,7500.
- Why build a Brake Lathe with all these steel durable components and then put one little plastic one in the middle?
- Designed as a mechanical fuse, this gear will fail before major damage is done to the lathe when something goes wrong such as selecting drum feed with a rotor mounted.
- This little safety devise is one of the central components that help make Ammco Brake Lathes last so long.
- 1.75" wide
- Weight: 1.09 lb
- For ventilated rotor
- Natural rubber and lead weights to make this our most effective silencer band for ventilated rotors.
- Length: 31" (780 mm).
- Weight: 177g.
- For ventilated rotors.
- Heavy-Duty, for larger applications.
- Length: 50" (1270 mm).
- Weight: 385 g.
- For non vented rotor
- Diameter: 6.5" (165mm).
- For non vented rotor
- Diameter: 9.25" (235mm).
- DeLuxe clip-on silencer
- Long reach 8" (203 mm).
- Weight: 86 g
