The identifier provides a fast, easy, and accurate means to determine refrigerant purity in refrigerant storage cylinders or directly in vehicle air conditioning systems.
It also determines the need and controls the purging of ambient air-based NCG from refrigerant storage vessels or vehicle air conditioning systems.
|
ROBINAIR 16910 |
|---|---|
| Sample Parameters | Vapor only, oil-free, 300 psig (2 MPa max.) |
| Detected Compounds | R-12, R-134a, R-22, hydrocarbons, air |
| Sensor Technology | Non-Dispersive Infrared (NDIR) |
| Refrigerant Sample Size | 0.3 ounces (8.5 grams) per sample |
| Refrigerant Loss during Purge Operation | Typically 0.4 ounces (11 grams) per minute of purge time. Refrigerant loss is dependent upon many factors, such as refrigerant source size, refrigerant source head space, initial refrigerant contamination, and final purge limit setting. |
| Power | Universal 110/220V AC, 50/60 Hz, 0.2 amps max. |
| Operational Temperature | 39� F � 122� F (4� C � 50� C) |
| Dimensions | 28 x 23 x 11 cm |
to be used on both R-12 and R-134a stations.
For models 17700A, 34700, 34300-2K, 34134Z, 34134-2K, AC374, AC375C.
Replacement filter dryer.
For AC690PRO ACS units.
Specially designed for maximum acid and moisture removal.
The performance of your pump depends largely on the quality and purity of the vacuum pump oil.
Robinair�s oil is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts.
Refillable 30 pound refrigerant recovery tank for use with R-134a refrigerant (not included).
1/2 inch ACME fittings on dual valves necessary for both recovery and recycling
Tank is shipped with a nitrogen fill to prevent moisture contamination and must be evacuated before use
Note: this tank DOES NOT include actual R-134A refrigerant - it is an empty tank (except for temporary nitrogen fill) designed for recovery use.
Gives you the cleaning power to flush particulates and system lubricant from A/C and refrigeration lines, evaporators, and condensers.
An ideal substitute for CFC-113, it has excellent cleaning properties and good evaporation rate.
Compatible with all CFC, HCFC, and HFC refrigerants. Meets ANSI/ASHRAE 97-1933.
Volume: 1 Gallon, 3.765 Liters
An economical means of flushing contaminants and scale from A/C system components, the flush gun uses dry shop air to pressurize the solvent.
The process thoroughly cleans the part, removing oil and any refrigerant contaminants and residue.
The attached nozzle directs the flow of solvent without spray-back.
