- Master set to cover most pulling applications.
- Extracts flange-type rear axles, semi-floating rear axle bearings, balancers, and other press-on parts.
- Also, with its 2/3" internal / external jaws it can remove gears, outer races, grease retainers, oil seals, and other internal / external pulling jobs.
- Operates on newer model cars and light trucks that have axles with bolts and studs no larger than 9/16" in diameter.
- Applies to 4,5,. and 6 bolt stud circles that range from 4.1/4" and 5.9/16".
- The variety of attachments to the slide hammer make it a multi-functional puller set that can accomplish almost any task.
- Includes:
- 3pc 6.1/2" internal / external jaws.
- 3pc 2.3/8" Internal pulling jaws
- 1pc Front hub puller assembly
- 1pc Forcing screw
- 1pc Sleeve
- Removes and installs vibration dampers, balancers, pulleys and gears with tapped holes.
- FEATURES heavy duty construction.
- Force is evenly distributed upon application.
- Tool can be used to pull out or install most objects since it works on either two or three tapped holes.
- Use with wrench for additional torque.
- Includes:
- 6pc - Cap screws
- 8pc - Adaptors
- 1pc-4 Slot puller plate
- 1pc - Main center bolt
- Pulls blind hole bearings, bushings and sleeve with collets ranging from 3/8" to 1.1/4" where regular pullers will not reach
- Use with slide hammer with collets to pull bearings or bushings
- Easily extracts bearings, double bearings, bearing cones and generator gears even in confined areas where standard puller jaws cannot reach
- Bearing separators curved, sharpened edge maximizes the gripping surface area and locks the bearing in position
- Push-puller secures its rods to the tapped holes of the bearing separator and pushes the object out
- Screw power enables a smooth, effective pulling force that completes the task, damage-free
- Bearing Separator - Chrome Molybdenum steel
- Includes:
- Available in 3 sizes
- Bearing Separator Capacity: 30 - 50mm
- Bolt Diameter: 3/8" x L120mm x 24T
- Bearing Separator Capacity: 50 - 75mm
- Bolt Diameter: 1/2" x L135mm x 20T
- Chrome Molybdenum steel
- Designed to safety and easily remove damaged or rounded head fasteners
- No pounding chisels, hammers or torches
- Includes 8mm straight rod to remove fasteners from sockets
- Size: 10, 11, 12, 13, 14, 15, 16, 17, 19mm
- 6 Heavy-duty steel extractors, reverse threaded for easy broken screws, bolts, studs or pipes removal
- SAE Sizes: 1/8", 1/4", 5/16", 7/16", 9/16", 3/4"
- Removes door upholstery and other trim items
- 2step tip allows easy access to deep under clip heads to prevent slippage
- Spring loaded handle for a great leverage
- Length 330mm.
- Weight 250g.
- Removes plastic door upholstery clips.
- Heavy duty steel shaft with large comfortable handle.
- Durable alloy steel
- 1 inch flat scraper blade
- For scraping surfaces before installing gaskets
- Length 355mm.
- Weight 181g.
- For plastic upholstery fasteners.
- Place tool under edge of door panel and insert into fastener as fast as pobbible, and then simply pry up.
- Large support area to protect clips and pad.
- Quickly removes dents for auto body repair work without having to extract vehicle's inside panels and upholsteries
- Heavy duty parts construction for strength and durability
- 12 lb square hammer design prevents rolling away out of reach
- Variety of tapered attachments easily pulls dented or creased sheet metals back into place
- Solid 5/8" slide shaft allows space to pull hammer, resulting in a powerful pulling force in hard-to-reach dented areas such as door panels, side panels, fenders and roof
- Contents:
- Curved Dolly
- Utility Dolly
- Double End Hand Dolly
- Shrinking Dolly
- Standard Bumping Hammer Pick
- Finish Hammer
- Reverse Curve Hammer
- Removes window molding clips on domestic cars and trucks
- Length 250mm.
- Weight 113g.
- Used to lift, adjust and position windshields, glass, sheet metal, plastic and glazed items
- Heavy-duty construction with swivel heads, appropriate for curved car windshields
- Stainless steel
- Semi-flexible tempered blades for putties and glues
- Extra-rigid blades for tough scraping jobs
- Durable alloy steel
- 1 inch flat scraper blade
- For scraping surfaces before installing gaskets
- Length 355mm.
- Weight 181g.
- Scribes, aligns and punches holes in light metal
- Perfect for tire repair
- Heat-treated, tapered shank
- Cleans carbon, paint and dirt from metal surfaces
- Durable, tempered steel bristles
- 3 x 19 rows of 1.1/4" long bristles
- Keeps loose nuts, bolts, screws, and metal pieces in place
- Stainless steel, strongly magnetized
- Heavy duty rubber covered magnets
- Size: 4-1/4"
- Keeps loose nuts, bolts, screws and metal pieces in place
- Stainless steel, fully magnetized
- Heavy duty rubber covered magnets
- Size: 9-1/2" (L) x 5-1/2" (W)
- 2" x 3-1/2" Rectangular mirror
- Extends from 8-1/4" (210mm) to 19-1/2" (495mm)
- Mirror angles to any direction
- Flexible 18" shaft reaches confined areas
- Lifts up to 3-1/2 lbs
- Complete scribe and hook set
- For pulling, picking o rings, etc...
- Durable, heat treated steel
- Chrome Vanadium steel
- High impact resistant handle
- Satin finish for corrosion resistance
- Sizes:
- 8" (200mm),
- 12" (300mm),
- 18" (450mm),
- 24" (600mm)
